A stack of plain white single-wipe sachets beside a navy binder, a fountain pen and blank paper on a dark slate desk

Home » Blog

How to Get EPA Registration for Disinfecting Wipes (and the Faster Route)

On this page

    A disinfecting wipe has to be registered with the EPA before it can be sold, but a brand does not always need its own registration. There are three routes. You can sell a product that is already registered under your own brand name through supplemental distribution. You can register your own product that is substantially similar to one already registered. Or you can register a new product backed by your own efficacy data. Whichever route you take, the wipe must be made in an EPA-registered establishment, the label must carry that establishment’s number, and states can set their own requirements, often a separate product registration, before it goes on sale there.

    This guide explains when a wipe needs registration, how each route works, what EPA charges and how long its review takes, and what to ask your manufacturer.

    Why a disinfecting wipe needs EPA registration

    Under federal pesticide law (FIFRA), a product that claims to kill, destroy or control germs on surfaces is a pesticide, and no one may sell or distribute an unregistered pesticide (40 CFR 152.15). The claim decides it. A wipe that says “disinfects”, “kills 99.9% of germs” or “sanitizes” on a surface needs registration. A wipe that only says it cleans does not.

    EPA treats claims against germs that threaten human health as public health claims. For these, the registrant has to submit efficacy data to EPA, not just keep it on file (EPA Pesticide Registration Manual, Chapter 4). For wipes, EPA expects the complete product to be tested as it will be sold: the formulation, the towelette and the pack together (EPA). Our guide to sanitizing vs disinfecting wipes explains which claims fall under EPA and which under the FDA.

    The three routes at a glance

    Route Whose registration Label EPA fee (FY2027) EPA review time
    1. Supplemental distribution The existing registrant’s. You become a distributor. Same as the registered label, under your brand name. Claims can be removed, not added. No registration service fee for a distributor label Notification by the registrant
    2. Your own registration, similar product Yours, for a product identical or substantially similar to a registered one Yours, within what the similar product supports $2,022 to $8,074 (categories A530 to A532) 4 to 5 months
    3. Your own registration, new product Yours, supported by your own data Yours, limited to what your data supports $8,074 to $23,711 (categories A460 to A465) 5 to 11 months

    Fees and review times are from EPA’s FY2027 fee table for antimicrobial new products. The distributor label exemption is on EPA’s list of actions not covered by registration service fees. Three points to keep in mind:

    • EPA decides the category, based on what you submit. For a new product it scales with the number of public health organisms on the label: up to 10 organisms is the lowest band, 51 or more the highest.
    • The review time is EPA’s clock only. It starts when EPA receives the application. Testing comes before it, and label negotiation and state registrations come after it.
    • Fees change. They rose 5% for applications received from October 1, 2026 (PRIA updates). A small business can apply for a 50% or 75% fee waiver (EPA small business waivers).

    Route 1: supplemental distribution, step by step

    Supplemental distribution lets a registrant sell its registered product under another company’s name and address (40 CFR 152.132). EPA’s own explanation is short: distributor products have the same composition and efficacy as the primary product, often under a different brand or product name (EPA). For a private label wipe brand it is usually the fastest route, because the product and its data already exist.

    1. Agree terms with the registrant. The registrant has to agree to take you on as a distributor. Contracts usually cover supply, label approval and what happens if the relationship ends.
    2. Get an EPA company number. Your company needs its own number before the paperwork can be filed. You request it by a signed letter on company letterhead that also sets your official address with EPA (Registration Manual, Chapter 14).
    3. The registrant files EPA Form 8570-5. The Notice of Supplemental Distribution is signed by both companies, but only the registrant can submit it. It lists both names and addresses, your company number, your brand name and the registration number of the product (Registration Manual, Chapter 9).
    4. Build your label from the registered label. The rules are strict, and the next section covers them.
    5. Have it made in the registered establishment. The distributor product must be produced, packaged and labeled in a registered establishment operated by the same producer that makes the registered product, or under contract with it. It cannot be repackaged: it stays in the producer’s unopened container.
    6. Register in each state where you sell. See the section on state registration below.

    What a distributor label can and cannot change

    The label must be the same as the registered product’s label, with these exceptions (40 CFR 152.132(d)):

    • Product name. It can differ, but it may not be misleading.
    • Company name. Your name and address can replace the registrant’s, with a phrase such as “Distributed by”.
    • Registration number. It becomes three parts: the registrant’s number, a dash, then your company number.
    • Establishment number. It must be the number of the final establishment where the product was produced.
    • Claims. Specific claims, such as some pests or sites, can be deleted if no other label changes are needed. Nothing can be added.
    Diagram of a three-part EPA registration number, 1234-12-1, showing the registrant's company number, the product number and the distributor's company number
    A distributor product carries the registered product’s number plus the distributor’s company number. The example uses EPA’s own format. Tap or click to enlarge.

    What you give up

    Supplemental distribution is quick because you inherit someone else’s registration. That also means you inherit its limits:

    • Changes follow the registered product. If the registrant changes the formula or label, your product must change in the same timeframe.
    • Cancellation is shared. If the registered product is cancelled, your distributor product is cancelled on the same date (40 CFR 152.132(e)).
    • A transfer does not carry you with it. If the registration is sold to another company, distributor arrangements do not transfer. The new registrant has to file a new Form 8570-5.
    • Stock after the relationship ends. EPA generally allows a distributor 18 months to sell existing stock after the registrant ends the arrangement, unless the contract says otherwise (Registration Manual, Chapter 9).
    • Liability is shared. The distributor is treated as the registrant’s agent, and both can be held liable for violations involving the distributor product.
    • List N lists primary products only. Buyers checking EPA’s list of disinfectants will find the primary registration, not your brand name. Our guide to disinfectant contact time shows how buyers read that list.

    Routes 2 and 3: registering your own product

    Your own registration gives you your own registration number and control of your label, within what the data supports. It also makes you the registrant, with the obligations that come with it. A typical application includes:

    • your EPA company number and the application form
    • the proposed label
    • a confidential statement of the formula
    • data on product chemistry, acute toxicity and efficacy, or citations of existing data with any compensation owed to the data owner
    • the fee, or a waiver request

    A similar product (route 2) fits a brand that wants its own registration for a formula that matches one already registered. The lowest fee category applies when you own the data or have an authorization letter from the data owner. Citing data you do not own puts you in a higher category, and you generally have to offer payment to the company that generated the data (Registration Manual, Chapter 2).

    A new product (route 3) is for a formula or claim set that no registered product supports, such as a new blend, a shorter contact time or more organisms. Efficacy testing for disinfecting wipes has followed EPA’s OCSPP 810.2200 guideline. In November 2024 EPA released draft guidance that recommends the ASTM E3363 method for wipes and says registrants should keep referencing 810.2200 until the guidance is final (EPA, linked above). Check the current status before you plan testing.

    EPA suggests contacting the right product team, or asking for a pre-application meeting, before you assemble an application. It is the easiest way to confirm which data and label requirements apply (Registration Manual, Chapter 4).

    A printed artwork proof for a single wipe sachet with blank grey panels, a plain sealed sachet, a magnifying loupe, a pen and a manila folder on a grey desk
    Whichever route you take, every word on a disinfecting wipe label has to match an EPA-accepted label.

    State registration

    A federal registration is not the last step. EPA does not review distributor labels, and it notes that the states where the products are sold generally review and approve them (EPA). A state can also set its own requirements before a federally registered product is sold there, and these vary from state to state. EPA tells applicants to contact each state where the product will be marketed (Registration Manual, Chapter 18). In many states that means a separate product registration. New York, for example, requires every pesticide product used, distributed or sold in the state to be registered with its Department of Environmental Conservation, and that includes supplemental distributor products (NYSDEC). Budget time and fees for every state you plan to sell in. You can find each state’s lead agency in the NPIC directory of state pesticide regulatory agencies.

    What your manufacturer is responsible for

    Whichever route you choose, the factory has its own EPA obligations, and they show up on your label:

    • Establishment registration. Every site that produces a pesticide product must be registered with EPA, and “produce” includes packaging and labeling (40 CFR Part 167).
    • The establishment number on the label. It identifies the final establishment that produced the product (40 CFR 156.10). It changes if the factory changes, which our guide to switching wipe manufacturers covers.
    • An annual production report. Each active establishment files EPA Form 3540-16 by March 1 every year (Registration Manual, Chapter 14).

    When you compare manufacturers, ask which registration the product will rely on, who holds it, which establishment will make it, and who files each document. Our list of questions to ask a private label wipes manufacturer includes these.

    Which route fits your brand

    • Launching quickly on a proven formula: supplemental distribution, if a registrant will take you on and its label carries the claims you need.
    • Wanting your own registration number with little or no new data: a similar-product registration, ideally with an authorization letter from the data owner.
    • Needing a claim no registered product carries: a new registration with your own efficacy data, and the longest timeline.
    • Not making a germ-kill claim at all: a cleaning wipe needs no EPA registration. Make sure nothing on the pack or in your marketing implies one.

    For the bigger picture, including FDA and cosmetic rules, see our overview of private label wet wipes regulations.

    Disinfecting wipes with Phoenix Wipes

    Phoenix Wipes is a US private label manufacturer of wet wipes in Holbrook, New York, with converting, filling and QC on every batch in-house. A disinfectant claim requires an EPA-registered formula and its own testing. We can supply under an existing registration or support a new submission for your brand. Plan additional lead time for the latter. We will tell you plainly which claims a given formula can carry and what registration it needs. Tell us the claim you need to make and we will tell you what the product has to meet. See our surface disinfecting wipes and quat wipes, or contact us with your claim list.

    Frequently asked questions

    Do I need my own EPA registration to sell disinfecting wipes?

    Not always. A brand can sell a registered product under its own name through supplemental distribution, with the registrant’s agreement and a label that matches the registered label. You still need an EPA company number, and you should check each state where you sell, since many require their own product registration.

    How long does EPA registration take for disinfecting wipes?

    EPA’s review clock ranges from 4 months for a product similar to a registered one to 11 months for a new product with 51 or more public health organisms, under the FY2027 fee table. Testing before submission and state registrations after approval add to that. Supplemental distribution is a notification rather than a review, so it is usually much faster.

    How much does it cost to register a disinfecting wipe with the EPA?

    EPA’s own fee for FY2027 ranges from $2,022 for a similar product where you own or are authorized to cite the data to $23,711 for a new product with 51 or more organisms. Small businesses can apply for a 50% or 75% waiver. Testing, consultants and state fees are separate and vary.

    What does a three-part EPA registration number mean?

    It marks a distributor product. The first two parts are the registered product’s number. The third is the distributor’s EPA company number.

    Can I add claims to a supplemental distributor label?

    No. A distributor label can only use language from the registered label. It can drop some specific claims, but it cannot add claims, sites or organisms.

    Why is my distributor product not on List N?

    List N shows primary registrations only. A distributor product is covered by the listing of its primary product, so buyers should search by the first two parts of the registration number.

    How this guide was put together: legal points link to the eCFR and EPA’s Pesticide Registration Manual. Fees and review times are from EPA’s FY2027 PRIA fee table, which EPA can update. This is general information, not legal or regulatory advice. Confirm your route with EPA or a regulatory consultant. Last reviewed: November 2026.


    Discover more from Phoenix Wipes Inc.

    Subscribe to get the latest posts sent to your email.

    Ready to launch your own wet wipe line?