Hands fanning a stack of individually wrapped wet wipe sachets in Holbrook, New York

Home » Blog

How Are Wet Wipes Made? The Process From Fabric to Sealed Pack

On this page

    Wet wipes are made in three stages: the materials are prepared, the fabric is converted into wipes and dosed with lotion, and the wipes are packed, sealed, coded and checked. A nonwoven fabric arrives on large parent rolls, is slit and folded, receives a measured amount of lotion, is cut into single wipes or stacks, and is sealed into a sachet, soft pack or canister before batch quality control and shipping.

    This guide walks through each step in order and, for each one, explains what is controlled there, because those controls are what make one wipe feel, perform and keep differently from another. It is written for brands that are developing a private label wipe and want to understand what their manufacturer is doing.

    Diagram of the wet wipe manufacturing process in nine steps, from substrate, lotion and packaging film through slitting, dosing, cutting, sealing, coding and shipping
    The main stages from fabric to finished pack, and what is controlled at each one. Tap or click to enlarge.

    The process at a glance

    Stage What happens What is controlled
    1. Substrate Nonwoven fabric is received on parent rolls and checked against its specification. Fibre blend, basis weight (gsm), width, strength
    2. Lotion Water is treated and the lotion is mixed in a batch tank. Formula, pH, viscosity, appearance, microbial quality
    3. Packaging Printed film, labels, lids and cartons are received. Artwork version, colour, seal layer, print legibility
    4. Slitting and folding The fabric web is cut to width and folded. Wipe width, fold pattern
    5. Dosing Lotion is applied to the folded web. Lotion load per wipe
    6. Cutting and counting The web is cut into single wipes or stacked to count. Wipe length, count per pack
    7. Packing and sealing Wipes are sealed into a sachet, soft pack or canister. Seal integrity, fill, leaks
    8. Coding and QC Each pack is coded and samples are checked for the batch. Lot code, weight, seal, micro, label
    9. Cartoning and shipping Packs are case-packed, labelled and palletised. Count per case, case labels, storage

    Step 1: The substrate

    Every wet wipe starts as a nonwoven fabric, a sheet made directly from fibres rather than woven yarn. Most wet wipes use spunlace, which is bonded with water jets and is soft and strong without a binder; airlaid, wetlaid and spunbond fabrics are used for other jobs (EDANA, How are nonwovens made). The fabric is bought from a nonwoven producer as wide parent rolls, specified by process, fibre blend, basis weight and surface structure, such as plain, embossed or apertured.

    The fabric decides much of how the finished wipe feels and behaves: softness, wet strength, lint and how much lotion it holds and releases. Our comparison of spunlace vs spunbond vs airlaid explains the options in detail.

    Step 2: Making the lotion

    The lotion is mostly water, so the process starts with purified water. Ingredients are then added in a set order in a mixing tank: cleansing agents, humectants and skin-conditioning ingredients, the preservative system, any active ingredient and the fragrance. The batch is checked against its specification before it is released to the line, typically for appearance, odour, pH, viscosity and microbial quality.

    The preservative system matters more in a wipe than in many other cosmetics, because the lotion sits in contact with a fibre sheet in a pack that is opened and closed. During development, formulas are usually challenged with a preservative efficacy test, such as the method in ISO 11930, which adds microorganisms to the product and checks that the preservative controls them over time.

    Steps 4 to 6: Converting the fabric into wipes

    Converting is the core of wipe manufacturing. The parent roll is unwound and slit to the width of the finished wipe, then folded. The fold depends on the pack: a sachet wipe is folded several times to fit a small packet, a soft-pack wipe is folded so each wipe pulls the next one up, and a canister wipe is wound into a perforated roll.

    Wet wipe converting machine at work on the Phoenix Wipes line in Holbrook, New York
    Converting: the fabric web is slit, folded, dosed and cut on the line.

    Lotion is then applied to the folded web, by spraying or by dosing it onto the fabric, in a measured amount. Lotion load is one of the most important controls on the line: too little and the wipe feels dry and cleans poorly; too much and it drips and the pack leaks. Finally, the web is cut to length, either into single wipes that go straight into sachets or into wipes that are stacked to the count of a multi-wipe pack.

    Step 7: Packing and sealing

    The pack format sets the equipment. Individually wrapped wipes are sealed one at a time into a sachet made from a printed laminate film, which keeps the lotion from drying out. Multi-wipe soft packs are sealed into a flexible pouch with a resealable label or lid. Canisters hold a roll of wipes that dispenses through the lid.

    Whatever the format, the seal is what keeps the wipe moist and clean until it is used. Seal strength is checked on samples from the run, and packs are inspected for leaks, misaligned print and incomplete seals. Standard test methods exist for this; ASTM F88, for example, covers the seal strength of flexible barrier materials.

    Single-sachet packing machine feeding a folded wipe on the Phoenix Wipes line
    Single-sachet packing: each folded wipe is sealed into its own printed sachet.

    Step 8: Coding and quality control

    Each pack is printed with a lot code that links it to the production batch, the materials used and the batch record, so any problem in the market can be traced. During and after the run, samples are taken and checked against the product specification. The checks usually include:

    • Weight: pack and lotion weight within tolerance.
    • Count: the right number of wipes in each multi-wipe pack.
    • Seal: no leaks, and seal strength within limits.
    • Appearance and label: correct artwork version, legible code, no print defects.
    • Microbiology: the finished product meets its microbial limits.

    Only when the batch passes is it released for shipping. Retained samples are kept so that questions about a batch can be answered later.

    Step 9: Cartoning and shipping

    Released packs are case-packed in the agreed count, the cases are labelled and the cases are palletised for storage and shipment. The case count and labelling are part of the specification, because they decide how the product arrives at a retailer, a distribution centre or a hotel.

    Hands fanning a stack of individually wrapped wet wipe sachets in Holbrook, New York
    Finished, individually wrapped sachets from the line.

    Common wipe problems and where they start

    When a finished wipe disappoints, the cause can usually be traced to one stage of the process. Knowing where to look makes sample feedback more useful, because you can describe the problem in terms the manufacturer can act on.

    Problem Usual starting point What to ask about
    Wipe feels dry Lotion load, or a weak seal letting the lotion evaporate Target lotion load and seal checks
    Pack leaks or drips Lotion load too high, or seal defects Seal strength results and fill tolerance
    Wipe tears in use Substrate weight or wet strength Basis weight and fibre blend
    Lint on skin or screens Substrate fibre and bonding A lower-lint grade
    Odour or discolouration over time Water quality, preservative system or packaging barrier Stability and preservative efficacy data
    Wipes stick together or will not dispense Fold pattern or lotion distribution Fold type for your pack format

    How the rules change the process

    The same equipment can make wipes that fall under different rules, and the rules decide what the factory has to document. The claim on the pack decides the category:

    • Cosmetic wipes, such as baby, facial and makeup remover wipes, are made under the cosmetic rules. The Modernization of Cosmetics Regulation Act requires the FDA to set good manufacturing practice regulations for cosmetics, and the FDA has published draft guidance on cosmetic good manufacturing practices.
    • OTC drug wipes, such as antiseptic hand wipes, must be made under drug current good manufacturing practice (21 CFR 211) and carry a Drug Facts label.
    • Disinfecting wipes are pesticides and must be made in an EPA-registered establishment (40 CFR 167).

    Our guide to private label wet wipes regulations explains which agency covers which claim, and sanitizing vs disinfecting wipes covers the germ-kill claims.

    What a brand decides at each stage

    A private label brand does not run the line, but it makes the decisions that set it up: the claim, the substrate, the formula or base formula, the wipe size and fold, the lotion feel, the pack format and count, the artwork and the case pack. The earlier these are fixed, the smoother sampling and the first run go. Our checklist of what to send a manufacturer for a quote lists them in the order a manufacturer needs them, and the wet wipes glossary explains the terms.

    How Phoenix Wipes makes wet wipes

    Phoenix Wipes is a US private label manufacturer of wet wipes in Holbrook, New York, specialising in individually wrapped wipes in full-colour printed sachets. Converting, filling and QC on every batch happen in-house at our New York facility, and you approve a physical sample of the wipe, lotion and printed sachet before production. The photographs in this guide were taken on our line.

    See our private label, contract manufacturing and sachet filling services, browse the product range, or send us your brief and we will tell you how your product would run.

    Frequently asked questions

    How are wet wipes made?

    A nonwoven fabric is slit and folded, dosed with a measured amount of lotion, cut into single wipes or stacks, and sealed into a sachet, soft pack or canister. Each batch is coded and checked before it is shipped.

    What are wet wipes made of?

    A nonwoven fabric, usually spunlace made from viscose, polyester, lyocell or cotton, or blends of them, and a lotion that is mostly water with cleansing agents, a preservative system and, depending on the product, skin-care ingredients, fragrance or an active ingredient.

    Are wet wipes made of plastic?

    Some are. Wipes that contain polyester or polypropylene fibres contain plastic; wipes made from viscose, lyocell or cotton are cellulose-based. The fibre blend is part of the specification and should be stated on request.

    How is the lotion added to a wipe?

    The lotion is sprayed or dosed onto the folded fabric on the converting line in a measured amount, called the lotion load, before the wipes are cut and packed.

    Do wet wipes have chemicals in them?

    Every lotion is made of chemical ingredients, including water. Cosmetic wipes must list their ingredients on the label, so you can see exactly what a wipe contains and choose a formula without fragrance or other ingredients you want to avoid.

    Is it cheaper to make your own wipes?

    For a brand, building a line rarely makes sense at first, because converting, sealing and testing equipment needs volume to pay back. Most brands start with a private label or contract manufacturer and decide later.

    How this guide was put together: the process steps follow standard wet wipe converting practice and the nonwoven descriptions from EDANA; regulatory references link to the FDA and eCFR. The photographs were taken on the Phoenix Wipes line in Holbrook, New York, and the diagram was drawn for this guide. Last reviewed: November 2026.


    Discover more from Phoenix Wipes Inc.

    Subscribe to get the latest posts sent to your email.

    Ready to launch your own wet wipe line?