Four white nonwoven wipe fabrics side by side: smooth spunlace, embossed spunlace, bulky airlaid and thin spunbond

Home » Blog

Wet Wipes Glossary: 67 Terms Private Label Buyers Should Know

On this page

    This glossary defines the terms that come up when a brand develops, quotes and launches a private label wet wipe: materials, formulas, packaging, regulation and commercial terms. Each definition is written for a buyer rather than an engineer, and where a term has its own guide on this site, the definition links to it.

    Terms are listed alphabetically. Regulatory definitions follow US rules unless stated otherwise; they summarise the rule and link to the source, and do not replace legal advice for a specific product.

    A · B · C · D · E · F · G · H · I · L · M · N · O · P · Q · R · S · V · W

    A

    Airlaid. A nonwoven made by carrying short fibres, mostly wood pulp, in an air stream onto a moving screen and bonding them with latex, heat or both. Bulky and absorbent but weaker when wet. See spunlace vs spunbond vs airlaid.

    Antiseptic wipe. A wipe that claims to kill germs on skin. In the US it is an over-the-counter (OTC) drug and must follow the OTC rules for its active ingredient, including a Drug Facts label. See OTC rules for hand sanitizer wipes.

    Artwork proof. The final layout of the printed pack, with colours, text and dimensions, that the brand signs off before packaging is printed. Changes after this point usually mean new printing plates or cylinders.

    B

    Base formula. A manufacturer’s existing lotion that a private label product starts from. It can be used as is or adjusted, for example by changing the fragrance or adding an ingredient.

    Basis weight. The weight of a fabric per unit area, given in grams per square metre (gsm). It indicates thickness and how much lotion a wipe can hold, but strength depends as much on fibre and bonding.

    Benchmark. An existing product the brand wants to match or beat. Sending a benchmark sample is the quickest way to describe size, thickness, wetness and feel.

    Binder. A chemical, often latex or another polymer, that holds fibres together in some nonwovens. Spunlace needs no binder; airlaid and some wetlaid fabrics use one.

    Biodegradable. Able to be broken down by microorganisms. In US marketing the claim must be substantiated under the FTC’s Green Guides, and it does not mean the same as flushable or dispersible.

    Four white nonwoven wipe fabrics side by side: smooth spunlace, embossed spunlace, bulky airlaid and thin spunbond
    Process, fibre and basis weight change how a wipe looks and feels.

    C

    Canister. A rigid tub or cylinder that dispenses wipes from a perforated roll through the lid. Common for disinfecting and industrial wipes.

    Case pack. The number of retail units packed in one shipping carton. It affects pallet counts and freight cost.

    Claim. What the pack says the product does. The claim decides how a wipe is regulated: cleansing is a cosmetic claim, killing germs on skin is a drug claim, and disinfecting surfaces is a pesticide claim. See sanitizing vs disinfecting wipes.

    Contract manufacturing. Production of a product to the customer’s own formula and specification. Compare private label, where the product usually starts from the manufacturer’s base formula.

    Converting. Turning a parent roll of fabric into finished wipes: slitting, folding, cutting, applying lotion and packing. For the full sequence, see how wet wipes are made.

    COSMOS. A European-origin private standard for organic and natural cosmetics, used internationally. A brand certifies to it through an approved certification body; it is separate from the USDA National Organic Program.

    Cosmetic. Under US law, a product intended to be applied to the body for cleansing, beautifying, promoting attractiveness or altering the appearance (FDA, Is it a cosmetic, a drug, or both?). Most cleansing and makeup remover wipes are cosmetics.

    D

    DDP (Delivered Duty Paid). An Incoterms rule under which the seller delivers the goods to the buyer’s named place, with transport and import costs paid (ITA, Know your Incoterms).

    Disinfecting wipe. A wipe that claims to kill germs on hard surfaces. In the US it is a pesticide that must be registered with the EPA and made in an EPA-registered establishment.

    Dispersible. Able to break apart into small pieces in water after flushing. Dispersibility is tested, for example under the INDA/EDANA flushability guidelines; see what makes a wet wipe flushable.

    Drug Facts label. The standard panel required on OTC drug products, listing active ingredients, uses, warnings and directions in a set order (21 CFR 201.66).

    E

    EPA establishment number. The number assigned to each facility that produces a pesticide, shown on the label of an EPA-registered product such as a disinfecting wipe (40 CFR 167).

    EPA registration number. The number that identifies an EPA-registered pesticide product and its registrant. A private label disinfecting wipe often sells under an existing registration through supplemental distribution.

    EXW (Ex Works). An Incoterms rule under which the seller makes the goods available at its own premises and the buyer arranges and pays for everything after that.

    F

    Fill weight. See lotion load.

    Flushable. A claim that a wipe can be flushed without harming plumbing or sewer systems. Several states regulate the claim and require “Do Not Flush” labelling on non-flushable wipes. See what makes a wet wipe flushable.

    FOB (Free on Board). A shipping term that places the handover of the goods at the point of shipment. In Incoterms 2020 it is a sea-freight rule; in US domestic trade it is often written as FOB shipping point or FOB destination. Agree which meaning a quote uses.

    Fold. How a wipe is folded before packing, which affects how it dispenses and how it fits the pack. Sachet wipes are usually folded several times; canister wipes come from a perforated roll.

    G

    gsm. Grams per square metre, the unit for basis weight. See our wet wipes GSM guide.

    H

    Hydroentanglement. Bonding a fibre web with high-pressure water jets. It is the process that makes spunlace.

    I

    INCI name. The International Nomenclature of Cosmetic Ingredients name used in cosmetic ingredient lists. US cosmetic labels list ingredients under the rules in 21 CFR 701.3.

    Incoterms. The International Chamber of Commerce’s standard trade terms that say who pays for and is responsible for transport, insurance and import at each stage. The current version is Incoterms 2020.

    Individually wrapped. One wipe sealed in its own sachet. Used for travel, hospitality, food service and healthcare, where hygiene or portion control matters.

    L

    Lint. Loose fibres a wipe leaves behind. Low-lint fabrics matter for screens, lenses and technical cleaning.

    Lot code. A code printed on each pack that links it to the production batch, the materials used and the batch record, so a problem can be traced.

    Lotion. The liquid a wet wipe is saturated with: water, cleansing agents, preservatives and any active, fragrance or skin-care ingredients.

    Lotion load. How much lotion is applied per wipe or per gram of fabric. Too little and the wipe feels dry; too much and it drips.

    Lyocell. A regenerated cellulose fibre made in a closed-loop solvent process. Soft and absorbent, often stronger than viscose.

    M

    Meltblown. A nonwoven made by blowing molten polymer into very fine fibres. Used mainly for filtration, sometimes layered with spunbond.

    MoCRA. The Modernization of Cosmetics Regulation Act of 2022, which added facility registration, product listing, adverse event reporting and other duties for US cosmetics (FDA).

    MOQ (minimum order quantity). The smallest order a manufacturer will produce. For wipes it is usually set by the printed packaging, the lotion batch and the number of SKUs. See private label wipes MOQ.

    Monograph (OTC). The FDA standard that sets the permitted active ingredients, strengths, labelling and testing for a category of OTC drugs. A product that conforms can be marketed without an individual drug approval.

    N

    NDC (National Drug Code). The unique product identifier for drugs in the US, including OTC drug wipes.

    Nonwoven. A fabric made directly from fibres or molten polymer bonded mechanically, thermally or chemically, rather than woven or knitted. Almost all wipes are nonwovens.

    NOP (National Organic Program). The USDA program that sets the US organic standard. A wipe can only carry the USDA Organic seal if it is certified under the program.

    O

    OEM. Original equipment manufacturer. In wipes, often used to mean a manufacturer that makes products sold under another company’s brand; close to private label and contract manufacturing.

    OTC drug. An over-the-counter drug sold without a prescription. Antiseptic and some skin-protectant wipes are OTC drugs and must follow drug manufacturing and labelling rules.

    P

    Pack format. How wipes are packaged: single sachet, soft pack, canister, tub or bulk. The format sets the equipment, packaging film and often the minimum order.

    Parent roll. A large roll of fabric as it arrives from the nonwoven producer, before converting.

    Polyester. A synthetic fibre that adds wet strength and resists solvents but absorbs less. Blended with viscose in many wipes; it makes the wipe “contain plastic” under some definitions.

    Preservative efficacy test. A lab test, also called a challenge test, that adds microorganisms to a product and checks the preservative system controls them over time.

    Private label. A product made by a manufacturer and sold under the buyer’s brand, usually starting from the manufacturer’s own base formula and formats.

    Three blank wet wipe pack formats: a single sachet, a resealable soft pack and a canister
    Single sachet, soft pack and canister: the pack format sets the equipment and often the minimum.

    Q

    Quat. Short for quaternary ammonium compound, a common disinfectant active. Quats can bind to cellulose fibres, so the substrate can change how much active reaches the surface.

    R

    Responsible person. Under MoCRA, the manufacturer, packer or distributor whose name appears on a cosmetic’s label. For a private label wipe this is normally the brand.

    RFQ (request for quotation). A message or document asking suppliers to price a defined specification. See what to send a manufacturer for a quote.

    S

    Sachet. A small sealed packet holding a single dose, here one wipe. Sachet film is usually a laminate chosen to keep the lotion from drying out.

    Sanitizing wipe. A term used for wipes that reduce germs. On hard surfaces, sanitizing claims are pesticide claims regulated by the EPA; on skin, germ-reduction claims are drug claims.

    Shelf life. How long a product stays within specification in its pack. It is supported by stability testing of the formula, fabric and pack together.

    SKU. Stock keeping unit: each distinct product variant, for example a different scent, count or design. More SKUs usually mean higher total minimums.

    Soft pack. A flexible multi-wipe pouch with a resealable label or lid.

    Spunbond. A nonwoven made by extruding molten polymer into continuous filaments that are laid down and bonded with heat. Strong and inexpensive, but stiff and not very absorbent.

    Spunlace. A nonwoven bonded by water jets (hydroentanglement), soft and strong without a binder. The standard substrate for baby, cosmetic and personal care wipes. See our spunlace nonwoven wipes.

    Substrate. The fabric a wipe is made from, specified by process, fibre blend, basis weight and structure.

    Supplemental distribution. An EPA arrangement that lets a distributor sell a registered pesticide product under its own brand name, with the registrant’s permission (40 CFR 152.132).

    V

    Viscose. A regenerated cellulose fibre, also called rayon in the US. Soft and absorbent, it wets out quickly but is weaker when wet.

    W

    Wet strength. How strong a fabric stays when saturated. Spunlace and spunbond keep most of their strength; airlaid and wetlaid lose more.

    Wetlaid. A nonwoven formed like paper, from short fibres suspended in water and drained on a screen. The basis of most dispersible wipes.

    White label. A finished, unchanged product that the manufacturer supplies to several brands, each applying its own label. Compare private label, where the product can be adjusted for one brand.

    For a full project walk-through, start with how to choose a private label wipes manufacturer, then what to send for a quote and the private label wet wipes regulations overview. Phoenix Wipes is a US private label manufacturer of wet wipes in Holbrook, New York; you can ask us about any term on this page as it applies to your product.

    Frequently asked questions

    What is the difference between private label and white label?

    A white label product is the same finished product sold by several brands under their own labels. A private label product is made for one brand and can be adjusted in formula, fabric or pack.

    What does gsm mean for wipes?

    Grams per square metre, the weight of the fabric. A higher gsm is usually thicker and holds more lotion, but it is not automatically stronger.

    What is a sachet wipe?

    A single wipe sealed in its own small packet, so it stays moist until it is opened. It is the usual format for travel, hotels, restaurants and in-flight use.

    Is a wet wipe a cosmetic or a drug?

    It depends on the claim. A wipe that cleanses is usually a cosmetic; one that claims to kill germs on skin is an OTC drug; one that claims to disinfect surfaces is an EPA-regulated pesticide.

    How this glossary was put together: definitions summarise the US rules and industry usage they cite, with links to the FDA, eCFR, FTC and International Trade Administration sources. Last reviewed: November 2026.


    Discover more from Phoenix Wipes Inc.

    Subscribe to get the latest posts sent to your email.

    Ready to launch your own wet wipe line?